Tag Archives: oozoon

CCcam 2.1.4 en Oozoon script

Posted on by

Het toegevoegde bestand bevat de CCcam executable en een start/stop script voor recente Oozoon images.
Een configuratiebestand zit er niet bij.

Installatie

Download CCcam.2.1.4.oozoon.tar.gz.
Kopieer het bestand naar /tmp op je dreambox.
Gebruik het volgende commando om het uit te pakken:

tar -xvvzf /tmp/CCcam.2.1.4.oozoon.tar.gz

Door op blauwe knop te drukken en dan ‘User scripts‘ te kiezen kun je CCcam nu starten en stoppen.
De optie ‘enable autostart‘ dient om CCcam bij het booten van de dreambox automagisch te starten.
Met ‘disable autostart‘ zet je dat weer uit.

Oozoon mbox startscript

Posted on by

/usr/script/mbox.mips.sh


#!/bin/sh

AUTHOR="cellie - based on the oozoon dccamd.sh script"
CAMNAME="mbox"
CAMBIN=mbox.mips
LINE="--------------------------------------"
INFOFILE="ecm.info"
# end

remove_tmp () {
 rm -rf /tmp/cam.info /tmp/share.info /tmp/share.onl
}
case "$1" in
 start)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 remove_tmp
 echo $CAMNAME > /tmp/cam.info
 ln -s /usr/keys /var/keys
 /usr/camd/$CAMBIN > /dev/null 2>&1
 ;;
 stop)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 killall -9  $CAMBIN 2>/dev/null
 sleep 2
 remove_tmp
 ;;
 restart)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 killall -9  $CAMBIN 2>/dev/null
 sleep 2
 remove_tmp
 sleep 15
 echo $CAMNAME > /tmp/cam.info
 ln -s /usr/keys /var/keys
 /usr/camd/$CAMBIN > /dev/null 2>&1
 ;;
info)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 if [ -f /tmp/cam.info ]; then
 RUNNING_CAM=`cat /tmp/cam.info`
 else
 RUNNING_CAM="no CAM"
 fi
 echo -n "$RUNNING_CAM is started "
 if [ `ps ax | grep $CAMBIN | grep -v grep | grep -v $0 | wc -l` -gt 0 ]; then
 echo "and running"
 echo $LINE
 ps ax | grep $CAMBIN | grep -v grep | grep -v $0
 else
 echo "but not running"
 fi
 echo $LINE

 if [ ! -f /etc/rc3.d/S99camd.sh ]; then
 echo "autostart is disabled"
 echo $LINE
 else
 if [ `ls -al /etc/rc3.d/S99camd.sh | grep $CAMBIN.sh | wc -l` -gt 0 ]; then
 echo "autostart of $CAMNAME is enabled"
 echo $LINE
 else
 echo "autostart of $CAMNAME is disabled"
 echo $LINE
 fi
 fi

 if [ -f /tmp/ecm.info ]; then
 echo "ECM info"
 echo $LINE
 cat /tmp/ecm.info
 echo $LINE
 fi
 if [ -f /tmp/cardinfo ]; then
 echo "Card info"
 echo $LINE
 cat /tmp/cardinfo
 echo $LINE
 fi
 ;;
 autostart | enable)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 ln -sfn /usr/script/$CAMBIN.sh /etc/rc3.d/S99camd.sh
 ;;
 noautostart | disable)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 rm /etc/rc3.d/S99camd.sh > /dev/null 2>&1
 ;;
 *)
 echo "Usage: $0 start|stop|restart|info|enable|disable"
 exit 1
 ;;
esac

exit 0

oozoon camd installatie

Posted on by

Oozoon firmware images hebben een eigen structuur voor de cam daemons.

De binaries leven in /usr/camd en het startscript vinden we in /usr/script. Cellie kon geen geschikt startscript voor mbox of newcs vinden en heeft er zelf wat gemaakt. Als uitgangspunt heeft /usr/script/dccamd.sh gedient, dat via het plugins menu is te downloaden.

De scripts worden opgestart door op de blauwe knop te drukken en dan ‘user scripts’ te kiezen.

Met CAMBIN=bestandsnaam geef je de bestandsnaam van de camd aan.
Bijvoorbeeld: CAMBIN=mbox.mips voor /usr/camd/mbox.mips

Lange sources, dus een mooie gelegenheid om syntax highlighting te demonstreren.

/usr/script/mbox.mips

#!/bin/sh

AUTHOR="cellie - based on the oozoon dccamd.sh script"
CAMNAME="mbox"
CAMBIN=mbox.mips
LINE="--------------------------------------"
INFOFILE="ecm.info"
# end

remove_tmp () {
 rm -rf /tmp/cam.info
}
case "$1" in
 start)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 remove_tmp
 echo $CAMNAME > /tmp/cam.info
 ln -s /usr/keys /var/keys
 /usr/camd/$CAMBIN > /dev/null 2>&1
 ;;
 stop)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 killall -9  $CAMBIN 2>/dev/null
 sleep 2
 remove_tmp
 ;;
 restart)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 killall -9  $CAMBIN 2>/dev/null
 sleep 2
 remove_tmp
 sleep 15
 echo $CAMNAME > /tmp/cam.info
 ln -s /usr/keys /var/keys
 /usr/camd/$CAMBIN > /dev/null 2>&1
 ;;
info)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 if [ -f /tmp/cam.info ]; then
 RUNNING_CAM=`cat /tmp/cam.info`
 else
 RUNNING_CAM="no CAM"
 fi
 echo -n "$RUNNING_CAM is started "
 if [ `ps ax | grep $CAMBIN | grep -v grep | grep -v $0 | wc -l` -gt 0 ]; then
 echo "and running"
 echo $LINE
 ps ax | grep $CAMBIN | grep -v grep | grep -v $0
 else
 echo "but not running"
 fi
 echo $LINE
 # check newcs also
 if [ `ps ax | grep newcs | grep -v grep | grep -v $0 | wc -l` -gt 0 ]; then
 echo "and also newcs is running"
 echo $LINE
 ps ax | grep newcs | grep -v grep | grep -v $0
 else
 echo "and newcs is not running"
 fi
 echo $LINE

 if [ ! -f /etc/rc3.d/S99camd.sh ]; then
 echo "autostart is disabled"
 echo $LINE
 else
 if [ `ls -al /etc/rc3.d/S99camd.sh | grep $CAMBIN.sh | wc -l` -gt 0 ]; then
 echo "autostart of $CAMNAME is enabled"
 echo $LINE
 else
 echo "autostart of $CAMNAME is disabled"
 echo $LINE
 fi
 fi

 if [ -f /tmp/ecm.info ]; then
 echo "ECM info"
 echo $LINE
 cat /tmp/ecm.info
 echo $LINE
 fi
 if [ -f /tmp/cardinfo ]; then
 echo "Card info"
 echo $LINE
 cat /tmp/cardinfo
 echo $LINE
 fi
 ;;
 autostart | enable)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 ln -sfn /usr/script/$CAMBIN.sh /etc/rc3.d/S99camd.sh
 ;;
 noautostart | disable)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 rm /etc/rc3.d/S99camd.sh > /dev/null 2>&1
 ;;
 *)
 echo "Usage: $0 start|stop|restart|info|enable|disable"
 exit 1
 ;;
esac

exit 0

/usr/script/newcs_1.65

#!/bin/sh

AUTHOR="cellie - based on the oozoon dccamd.sh script"
CAMNAME="newcs"
CAMBIN=newcs_1.65
LINE="--------------------------------------"
INFOFILE="ecm.info"
# end

remove_tmp () {
 rm -rf /tmp/cardserver.info
}
case "$1" in
 start)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 remove_tmp
 echo $CAMNAME > /tmp/cardserver.info
 /usr/camd/$CAMBIN > /dev/null 2>&1
 ;;
 stop)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 killall -9  $CAMBIN 2>/dev/null
 sleep 2
 remove_tmp
 ;;
 restart)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 killall -9  $CAMBIN 2>/dev/null
 sleep 2
 remove_tmp
 sleep 15
 echo $CAMNAME > /tmp/cardserver.info
 /usr/camd/$CAMBIN > /dev/null 2>&1
 ;;
info)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 if [ -f /tmp/cam.info ]; then
 RUNNING_CAM=`cat /tmp/cardserver.info`
 else
 RUNNING_CAM="no CAM"
 fi
 echo -n "$RUNNING_CAM is started "
 if [ `ps ax | grep $CAMBIN | grep -v grep | grep -v $0 | wc -l` -gt 0 ]; then
 echo "and running"
 echo $LINE
 ps ax | grep $CAMBIN | grep -v grep | grep -v $0
 else
 echo "but not running"
 fi
 echo $LINE
 # check newcs also
 if [ `ps ax | grep newcs | grep -v grep | grep -v $0 | wc -l` -gt 0 ]; then
 echo "and also newcs is running"
 echo $LINE
 ps ax | grep newcs | grep -v grep | grep -v $0
 else
 echo "and newcs is not running"
 fi
 echo $LINE

 if [ ! -f /etc/rc3.d/S95cardserver.sh ]; then
 echo "autostart is disabled"
 echo $LINE
 else
 if [ `ls -al /etc/rc3.d/S95cardserver.sh | grep $CAMBIN.sh | wc -l` -gt 0 ]; then
 echo "autostart of $CAMNAME is enabled"
 echo $LINE
 else
 echo "autostart of $CAMNAME is disabled"
 echo $LINE
 fi
 fi

 if [ -f /tmp/ecm.info ]; then
 echo "ECM info"
 echo $LINE
 cat /tmp/ecm.info
 echo $LINE
 fi
 if [ -f /tmp/cardinfo ]; then
 echo "Card info"
 echo $LINE
 cat /tmp/cardinfo
 echo $LINE
 fi
 ;;
 autostart | enable)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 ln -sfn /usr/script/$CAMBIN.sh /etc/rc3.d/S95cardserver.sh
 ;;
 noautostart | disable)
 echo $LINE
 echo "[SCRIPT] $1: $CAMNAME"
 echo $LINE
 rm /etc/rc3.d/S95cardserver.sh > /dev/null 2>&1
 ;;
 *)
 echo "Usage: $0 start|stop|restart|info|enable|disable"
 exit 1
 ;;
esac

exit 0